Government Contract : FA850305G0001 | FA8503-05-G-0001

There are 445 government contract actions against this contract, with quantities ranging from 1 and 1,754. Execution of this contract spans from January 1, 2005 and December 12, 2007. The procuring agency is 5700: AIR FORCE, Department of the (Headquarters, USAF).

This contract includes procurement for CIRCUIT CARD ASSEMB; MOTOR,HYDRAULIC; and HOIST,HIGH PERFORMA.

Back to Agency ListRecent contract actions
Government ContractDelivery OrderLine ItemQuantityPriceAgencyAward Date
fa850305g0001Y8510001Free Trial5700: AIR FORCE, Department of the (Head2007-12-24
fa850305g0001Y8510001Free Trial5700: AIR FORCE, Department of the (Head2007-12-20
fa850305g0001Y8500002Free Trial5700: AIR FORCE, Department of the (Head2007-12-19
fa850305g0001Y8500001Free Trial5700: AIR FORCE, Department of the (Head2007-12-19
fa850305g0001Y8490001Free Trial5700: AIR FORCE, Department of the (Head2007-12-02
fa850305g0001Y8470001Free Trial5700: AIR FORCE, Department of the (Head2007-11-30
fa850305g0001Y8470002Free Trial5700: AIR FORCE, Department of the (Head2007-11-30
fa850305g0001Y8480001Free Trial5700: AIR FORCE, Department of the (Head2007-11-28
fa850305g0001Y8460001Free Trial5700: AIR FORCE, Department of the (Head2007-11-21
fa850305g0001Y8440001Free Trial5700: AIR FORCE, Department of the (Head2007-11-21
Back to Agency List

Federal Supply Classes for FA850305G0001

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1630 - Aircraft Wheel and Brake Systems

Includes: Includes Skis; Floats; Tracks; Landing Wheel Skid Detectors; Valves specifically designed for use with hydraulic or pneumatic wheel and brake systems; Helicopter Rotor Brake System Components.

Excludes: Excludes Landing Gear Axles (FSC 1620).

1640 - Aircraft Control Cable Products

Includes: Includes Wire Rope; Single Leg Wire Assemblies; Wire Strands; Control Pulleys; Turnbuckle Lock Clips and other wire rope attachments and terminations.

Excludes: Excludes General use Chain and Wire Rope (FSC 4010); general use Pulleys (FSC 3020); general use Miscellaneous Hardware (FSC 5340); general use Fittings for Rope, Cable and Chain (FSC 4030).

Note: Note-Wire rope, with attachments or terminations and pulleys, used in aircraft control applications, will be classified in this class.

1650 - Aircraft Hydraulic, Vacuum, and De-icing System Components

Includes: Includes Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes: Excludes Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Note: Note-This class includes only those components specifically designed for aircraft use.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3130 - Bearings, Mounted

Includes: Includes Pillow Block Units; Cartridge Units; Flange Units; Takeup Units; Hanger Box Units; Flat Box Units; Step Box Units.

Excludes: Excludes Antifriction Bearings (FSC 3110); Plain Unmounted Bearings (FSC 3120).

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3950 - Winches, Hoists, Cranes, and Derricks

Includes: Includes Windlasses: Capstans: Ore Bridges: Gypsies: Warehouse Cranes: Wharf Cranes, Mobile or Fixed: Overhead Traveling Cranes.

Excludes: Excludes Crane-Shovels (FSC 3810); Barge Mounted Cranes (FSC 1935); Winches for Integral Mounting on Trucks or Tractors (FSC 3830); Locomotive Cranes (FSC 2230).

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4030 - Fittings for Rope, Cable, and Chain

Includes: Includes Anchor Guys; Wire Stranded Bands; Wire Rope Clamps; Cargo Hooks; Shackles; Swivels; Rope Terminals; Rope Wedges.

Excludes: Excludes Clamp Blocks (FSC 5340); Support Hooks (FSC 5340).

Note: Note-All items, including specially designed, will be classified in this FSC. Fittings classified in this FSC are items used in conjunction with chain, rope, and are attached to perform certain functions, (e.g., hooks, shackles, and wedges) refer to item name definitions for parameters.

5305 - Screws

Includes:

5307 - Studs

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5930 - Switches

Includes: Includes Rotary, Knife, Toggle, Push Button, Mercury, Thermostatic, and Differential Pressure Switches.

Excludes: Excludes Switchgear.

5977 - Electrical Contact Brushes and Electrodes

Includes: Includes Brushes for electrical rotating equipment; Carbon Stock for Brushes; Brush Arm and Holders; Lighting Electrodes.

Excludes: Excludes Anodes; Cathodes; Welding Electrodes.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6680 - Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments

Includes: Includes Liquid Level Float Instruments; Revolution Counters; Speedometers; Rotation Measuring Instruments and Apparatus; Oxygen Flow Indicators; Tachometers, including Engine Tachometers.

Excludes: Excludes Combination Instruments; (FSC 6695); Meteorological Instruments (FSC 6660); and Automatic Control Valves (FSG 48).

See full contract details by trying BidLink Free for 7 days

Get complete contract details