Government Contract : SP040006AB689 | SP0400-06-A-B689

There are 88 government contract actions against this contract, with quantities ranging from 1 and 842. Execution of this contract spans from October 10, 2005 and September 9, 2006. The procuring agency is 97AS: Defense Logistics Agency.

This contract includes procurement for BEARING,WASHER,THRU; BASE; and VALVE ASSEMBLY,TRAI.

Back to Agency ListRecent contract actions
Government ContractDelivery OrderLine ItemQuantityPriceAgencyAward Date
sp040006ab68900890001Free Trial97AS: Defense Logistics Agency2006-09-12
sp040006ab68900880001Free Trial97AS: Defense Logistics Agency2006-07-25
sp040006ab68900840001Free Trial97AS: Defense Logistics Agency2006-07-18
sp040006ab68900850001Free Trial97AS: Defense Logistics Agency2006-07-18
sp040006ab68900860001Free Trial97AS: Defense Logistics Agency2006-07-18
sp040006ab68900870001Free Trial97AS: Defense Logistics Agency2006-07-18
sp040006ab68900830001Free Trial97AS: Defense Logistics Agency2006-06-14
sp040006ab68900800001Free Trial97AS: Defense Logistics Agency2006-05-31
sp040006ab68900810001Free Trial97AS: Defense Logistics Agency2006-05-31
sp040006ab68900820001Free Trial97AS: Defense Logistics Agency2006-05-31
Back to Agency List

Federal Supply Classes for SP040006AB689

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

2920 - Engine Electrical System Components, Nonaircraft

Includes: Includes Generators; Magnetos; Spark Plugs; Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines.

Excludes: Excludes Vehicular Lighting Fixtures (FSC 6220) and Aircraft Generators (FSC 2925).

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3433 - Gas Welding, Heat Cutting, and Metalizing Equipment

Includes: Includes Metal Spray Guns; Arc Cutting Machines; Torches and Tips; Gas Brazing Machines; Flame Cutting Machines; Vacuum Metalizers; Spark Discharge Metalizers.

Excludes: Excludes Welding Supplies; Disintegrating Machines.

3441 - Bending and Forming Machines

Includes:

Excludes: Excludes Wire and Metal Ribbon Forming Machines.

3445 - Punching and Shearing Machines

Includes:

3455 - Cutting Tools for Machine Tools

Includes: Includes Broaches; Files; Milling Cutters; Reamers; Saws.

Excludes: Excludes Flame Cutting Tools.

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6110 - Electrical Control Equipment

Includes: Includes Contactors; Motor Controllers; Power Servomechanisms; Switchgear; Voltage Regulators.

Excludes: Excludes Automatic Pilot Mechanisms; Relays; Resistors.

6115 - Generators and Generator Sets, Electrical

Includes: Includes Engine, Turbine, Wind, and Hand Driven Generator Sets and Auxiliary Aircraft Generators.

Excludes: Excludes Motor-Converters; Motor-Generator Sets; Engine Generators; Engine Accessory Generators.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6605 - Navigational Instruments

Includes: Includes Azimuths; Sextants; Octants; Compasses; Plotting Boards; Underwater Log Equipment; Air Position Indicators; Drift Meters.

6610 - Flight Instruments

Includes: Includes Air Speed Indicators; Rate of Climb Indicators; Bank and Turn Indicators; Pitot Tubes; Gyro Horizon Indicators; Attitude Gyro Indicators.

Excludes: Excludes Navigational Instruments (FSC 6605).

6635 - Physical Properties Testing and Inspection

Includes: Includes Destructive and Nondestructive Inspection Equipment such as Fluorescent Penetrant Inspection Units; Magnetic Inspection Units; Industrial X-Ray Machines; Industrial X-Ray Film; Tensiometers; Material Hardness Testers.

Excludes: Excludes General Purpose Measuring Tools (FSC 5210) and Precision Measuring Tools and Inspection Gages (FSC 5220).

6645 - Time Measuring Instruments

Includes: Includes Clocks; Job Recording Devices; Time Recorders; Time Stamps, Watch and Clock Movements; Watches.

6660 - Meteorological Instruments and Apparatus

Includes: Includes Meteorological Ballons; Radiosonde Sets; Radarsonde Sets.

6680 - Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments

Includes: Includes Liquid Level Float Instruments; Revolution Counters; Speedometers; Rotation Measuring Instruments and Apparatus; Oxygen Flow Indicators; Tachometers, including Engine Tachometers.

Excludes: Excludes Combination Instruments; (FSC 6695); Meteorological Instruments (FSC 6660); and Automatic Control Valves (FSG 48).

6685 - Pressure, Temperature, and Humidity Measuring and Controlling Instruments

Includes: Includes Thermometers, including Engine Thermometers; Pressure Gages; Thermocouple Leads; Resistance Bulbs.

Excludes: Excludes Clinical Therometers; (FSC 6515); Thermostatic and Differential Pressure Switches (FSC 5930); and Meteorological Instruments (FSC 6660).

6695 - Combination and Miscellaneous Instruments

Includes: Includes Flow-Pressure Instruments; Taximeters; Dynamometers.

Excludes: Excludes Dental, Medical, Surgical, and Veterinary Instruments.

8120 - Commercial and Industrial Gas Cylinders

Includes:

Excludes: Excludes Filled gas cylinders and items related to gaseous and liquefied gaseous dispensing systems, both mobile and installed. All components of installed gas dispensing systems are classified by "application" or "function" with the end equipment for which designed.

Note: Note-This class includes empty commercial and industrial gas cylinders and their caps, valves, and valve spare parts.

See full contract details by trying BidLink Free for 7 days

Get complete contract details