Government Contract : SPE4A113G0002 | SPE4A1-13-G-0002

There are 936 government contract actions against this contract, with quantities ranging from 1 and 2,800. Execution of this contract spans from August 8, 2013 and September 9, 2017. The procuring agency is 97AS: DEFENSE LOGISTICS AGENCY.

This contract includes procurement for PULLER,SEAL RING; FOOT,PULLER; and PULLER MATING.

Back to Agency ListRecent contract actions
Government ContractDelivery OrderLine ItemQuantityPriceAgencyAward Date
spe4a113g000209160001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-29
spe4a113g000209190001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-29
spe4a113g000209050001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-29
spe4a113g000209120001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-28
spe4a113g000209180001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-27
spe4a113g000209170001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-27
spe4a113g000209140001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-26
spe4a113g000209110001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-24
spe4a113g000209070001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-22
spe4a113g000209150001Free Trial97AS: DEFENSE LOGISTICS AGENCY2017-09-22
Back to Agency List

Federal Supply Classes for SPE4A113G0002

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1710 - Aircraft Landing Equipment

Includes: Includes Aircraft Arresting Barriers.

Excludes: Excludes Airport Runway Marker Lights (FSC 6220).

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

1740 - Airfield Specialized Trucks and Trailers

Includes: Includes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies; Trailers: Afterburner, Engine, Propeller, Fuselage, and Wing; Trucks, Aircraft Fuselage and Aircraft Wing; Skids, Engine Transport; Stands, Engine Transport; Bomb Trailers, Airfield; Trucks, Crashed Aircraft Removing.

Excludes: Excludes Airfield Specialized Lift Trucks (FSC 3930), and Trailers (FSC 2330); Highway Type Trucks (FSC 2320), and Trailers (FSC 2330); Cargo Loading and Unloading Trailers (FSC 2330) and Trucks (FSC 2320).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, and 2590.

2510 - Vehicular Cab, Body, and Frame Structural Components

Includes: Includes Leaf Type Vehicular Springs; Suspension Type Shock Absorbers.

Excludes: Excludes Vehicular Hardware (FSG 53); Specialized Vehicular Furniture (FSC 2540).

2815 - Diesel Engines and Components

Includes: Includes Automotive, Industrial, Marine, Locomotive, and all other types of Diesel and Semi-Diesel Engines.

Excludes: Excludes Engines Accessories (FSC 2990).

2835 - Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Includes: Includes Airflow Deflectors; Combustion Chambers, Compressors, Turbines, Accessory Gear Boxes and their Components.

Excludes: Excludes Components for Gas Turbines and Jet Engines, Aircraft Prime Mover (FSC 2840); Engine Fuel Systems (FSC 2910); Engine Electrical Systems (FSC 2920); Engine Cooling Systems (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Note: Note-Engines and Components classified in this FSC are primarily for use on non-aircraft prime mover (e.g., Naval ship applications), aircraft non-prime mover (e.g., airframe mounted auxiliary power units), and for aircraft ground support equipment (e.g., start carts).

2840 - Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Includes: Includes Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes: Excludes Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Note: Note-Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

3010 - Torque Converters and Speed Changers

Includes: Includes Fluid Couplings; Nonvehicular Clutches and Couplings; Horizontal Right Angle Drive Gear Units.

Excludes: Excludes Automotive Torque Converters (FSC 2520); Vehicular Power Transmission Components (FSC 2520); Rotary Aircraft Transmission Gear Units (FSC 1615).

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3940 - Blocks, Tackle, Rigging, and Slings

Includes:

Excludes: Excludes Load Chain; Chain and Metal Rope Fittings; Wire Rope; Hoists; Ship Rigging.

3950 - Winches, Hoists, Cranes, and Derricks

Includes: Includes Windlasses: Capstans: Ore Bridges: Gypsies: Warehouse Cranes: Wharf Cranes, Mobile or Fixed: Overhead Traveling Cranes.

Excludes: Excludes Crane-Shovels (FSC 3810); Barge Mounted Cranes (FSC 1935); Winches for Integral Mounting on Trucks or Tractors (FSC 3830); Locomotive Cranes (FSC 2230).

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4140 - Fans, Air Circulators, and Blower Equipment

Includes: Includes Wall Type Fans; Pedestal Type Fans; Household Type and Attic Type Exhaust Fans; Floor Fans; Forged Draft Exhaust and Disposal Kits; Fans, Air Circulators, and Blower Equipment, whether designated as "industrial" or "nonindustrial" by application and/or use.

Excludes: Excludes Combination Heater-Fans (FSC 4520).

Note: Note-Fans and impellers which are specifically designed for use with specific individual types of equipment are to be classified in the same classes as their next higher assemblies or in the appropriate components or accessories classes (as in Group 25 or 29 or Class 1680) as prescribed by the indexes and structure of the FSC.

4320 - Power and Hand Pumps

Includes:

Excludes: Excludes Laboratory Jet Pumps (FSG 65 and 66).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

4910 - Motor Vehicle Maintenance and Repair Shop Specialized Equipment

Includes: Includes Automotive Lifts; Wheel Aligners; Brake Service Equipment; Tire Maintenance and Repair Equipment; Test stands and test equipment specially designed for use with motor vehicles.

Excludes: Excludes Hand Tools (FSG 51); Lubrication and Fuel Dispensing Equipment (FSC 4930); Basic types of electrical and electronic test instruments, including those specifically designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments as shown in the indexes in the FSC (FSC 6625).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

4930 - Lubrication and Fuel Dispensing Equipment

Includes: Includes Hand Grease Guns; Centralized Lubrication Systems; Hydrostatic Lubricators; Oil and Gasoline Dispensing Pumps; Fuel Oil Dispensing Pumps; Hand Oilers; Grease Dispensers; Pressure Gun Attachments; Sight Feed Lubricators.

Excludes: Excludes Alemite and Lubrication Fittings (FSC 4730).

4933 - Weapons Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance Stands, Fixtures, and Jigs.

Excludes: Excludes Atomic Ordnance Maintenance and Repair Shop Specialized Equipment; Airborne Weapons Maintenance and Repair Shop Equipment.

4935 - Guided Missile Maintenance, Repair, and Checkout Specialized Equipment

Includes: Includes Checkout equipment and test equipment specially designed for use with guided missiles and guided missile remote control systems.

Excludes: Excludes Specially designed internal (built-in) checkout equipment for guided missile remote control systems; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

4940 - Miscellaneous Maintenance and Repair Shop Specialized Equipment

Includes: Includes Paint Spraying Equipment.

Excludes: Excludes Hand Tools (FSG 51).

5110 - Hand Tools, Edged, Nonpowered

Includes: Includes Chisels; Files; Pipe Cutters; Rasps; Saws; Screw Plates; Axes; Hatchets; Machetes.

5120 - Hand Tools, Nonedged, Nonpowered

Includes: Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes: Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

5130 - Hand Tools, Power Driven

Includes: Includes Drills; Riveters; Portable Electric Saws; Pneumatic Tools; Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

5180 - Sets, Kits, and Outfits of Hand Tools

Includes:

Note: Note-This class includes sets, kits and outfits consisting of several different items classifiable either in a single class or in several classes. Excluded from this class are sets, kits and outfits consisting of variations (such as size or color) of an item. Classify these items in the same class as the individual item.

5210 - Measuring Tools, Craftsmen's

Includes: Includes Calipers; Levels; Micrometers; Plumb Bobs; Precision Tapes; Squares; Angle Gages; Center Gages; Depth Gages; Draw Gages; Drill Point Gages; Fillet and Radius Gages; Glaziers' Gages; Height Gages (Vernier); Planer Gages; Rivet Selector Gages; Saw Tooth Set Gages; Screw Pitch Gages; Surface Gages; Telescoping Gages; Thickness Gages; Tube Bead Gages; Tube Flare Gages; Twist Drill Gages; Twist Drill and Rod Gages; Twist Drill and Tap Gages; Taper-Wire-Thickness Gages; Wire Gages; Tool Setting Planer and Shaper Gages; Gage Blocks.

Note: Note-This class does not include special inspection gages, which are classified in Class 5220.

5220 - Inspection Gages and Precision Layout Tools

Includes: Includes Go and Not-Go Gages, including Plug, Ring, Snap, Thread, and Length Gages; Profile Gages; Fixture Gages; Special Inspection Gages.

Note: Note-Special inspection gages are included in this class.

See full contract details by trying BidLink Free for 7 days

Get complete contract details