Government Contract : SPM40005D0004 | SPM400-05-D-0004

There are 9,001 government contract actions against this contract, with quantities ranging from 1 and 189,000. Execution of this contract spans from March 3, 2005 and February 2, 2014. The procuring agency is 97AS: Defense Logistics Agency.

This contract includes procurement for TERMINAL,LUG; PLATE ASSEMBLY; and WEDGE,ELECTRICAL WI.

Back to Agency ListRecent contract actions
Government ContractDelivery OrderLine ItemQuantityPriceAgencyAward Date
spm40005d0004UN260001Free Trial97AS: Defense Logistics Agency2014-02-27
spm40005d0004UN250001AAFree Trial97AS: Defense Logistics Agency2014-02-26
spm40005d0004UN250001ABFree Trial97AS: Defense Logistics Agency2014-02-26
spm40005d0004UN250001ACFree Trial97AS: Defense Logistics Agency2014-02-26
spm40005d0004UN240001Free Trial97AS: Defense Logistics Agency2014-01-29
spm40005d0004UN230001Free Trial97AS: Defense Logistics Agency2014-01-23
spm40005d0004UN230002Free Trial97AS: Defense Logistics Agency2014-01-23
spm40005d0004UN220001Free Trial97AS: Defense Logistics Agency2014-01-13
spm40005d000419640001Free Trial97AS: Defense Logistics Agency2014-01-08
spm40005d000419630001Free Trial97AS: Defense Logistics Agency2014-01-04
Back to Agency List

Federal Supply Classes for SPM40005D0004

1420 - Guided Missile Components

Includes: Includes Structural Components; Components and Accessories Specially Designed for use on or with guided missiles, including Complete Gyro Mechanisms, Hydraulic Pumps, Automatic Pilot Mechanisms and Specially Designed Assemblies, and Electronic Guidance Equipment installed in missiles.

Excludes: Excludes Electronic Remote Guidance Equipment used to guide missiles; Solid and Liquid Propellant Units; Components of Gyro Mechanisms.

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1610 - Aircraft Propellers and Components

Includes: Includes Aircraft Propellers; Propeller Blades, Cams, Cones, Hubs, Nuts, and Spinners; Test Clubs; Synchronizers; Power Control Units; Integral Oil Control Measures and Propeller Governors.

Excludes: Excludes Rotary Rudder and Rotary Wing Blades (FSC 1615).

1615 - Helicopter Rotor Blades, Drive Mechanisms and Components

Includes: Includes Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions.

Excludes: Excludes Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).

Note: Note-This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.

1620 - Aircraft Landing Gear Components

Includes: Includes Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes: Excludes Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

1650 - Aircraft Hydraulic, Vacuum, and De-icing System Components

Includes: Includes Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes: Excludes Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Note: Note-This class includes only those components specifically designed for aircraft use.

1660 - Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Includes: Includes Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes: Excludes Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Note: Note-This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

2810 - Gasoline Reciprocating Engines, Aircraft Prime Mover; and Components

Includes: Includes Complete Engine Assemblies; Piston Rings; Cylinders; Pistons; Camshafts; Crankshafts.

Excludes: Excludes Fuel System Components (Carburetors; Carburetor Floats; Fuel Pumps; Fuel Controls; Fuel Valves) (FSC 2915); Electrical System Components (Spark Plug Adapters; Ignition Distributors; Ignition Coils, Electrical Starters) (FSC 2925); Engine Cooling System Components (Engine Oil Coolers; Cooling Radiators) (FSC 2935); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2945); Miscellaneous Engine Accessories (Pneumatic Starters, Cowling Mounts, Control Assemblies) (FSC 2995).

Note: Note-Engines and components classified in this FSC must be desinged specifically for use as/on an aircraft prime mover. Auxiliary engines and their components will be classified in the appropriate FSC elsewhere in FSG 28.

2835 - Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Includes: Includes Airflow Deflectors; Combustion Chambers, Compressors, Turbines, Accessory Gear Boxes and their Components.

Excludes: Excludes Components for Gas Turbines and Jet Engines, Aircraft Prime Mover (FSC 2840); Engine Fuel Systems (FSC 2910); Engine Electrical Systems (FSC 2920); Engine Cooling Systems (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Note: Note-Engines and Components classified in this FSC are primarily for use on non-aircraft prime mover (e.g., Naval ship applications), aircraft non-prime mover (e.g., airframe mounted auxiliary power units), and for aircraft ground support equipment (e.g., start carts).

2840 - Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Includes: Includes Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes: Excludes Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Note: Note-Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

2915 - Engine Fuel System Components, Aircraft and Missile Prime Movers

Includes: Includes Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Controls, Jet Engine; Fuel Primers; Water Injection Controls and Valves; Fuel Valves Fuel Flow Regulators; Components of Smoke Abatement Systems.

Excludes: Excludes Aircraft Fuel Tanks (FSC 1560); In-flight Refueling System Fuel Components (FSC 1680). Fuel System Components not specifically designed for use with Aircraft Engines or Missile Prime-movers.

Note: Note-Fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this FSC.

2925 - Engine Electrical System Components, Aircraft Prime Moving

Includes: Includes Magnetos; Igniters (Spark Plugs); Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines; Engine Accessory Generators.

Excludes: Excludes Aircraft Lighting Fixtures (FSC 6220); Auxiliary Aircraft Generators (FSC 6115).

Note: Note-Items designed for specific use on aircraft and guided missile prime movers are to be placed in this FSC.

2935 - Engine System Cooling Components, Aircraft Prime Moving

Includes: Includes Radiators; Cooling System Pumps; Water Hose Assemblies; Lubricating Oil Coolers and Control Valves; Oil Temperature Regulators.

Excludes: Excludes Cooling System Components not specifically designed for use with Aircraft Engines.

Note: Note-This class includes only cooling system components for aircraft and/or guided missile prime movers only.

2945 - Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving

Includes: Includes Air Filters; Oil Filters; Strainers; Cleaners.

Excludes: Excludes Fuel Filters (FSC 2915); Items designed for other than Engines.

Note: Note-Items placed in this FSC should be specifically designed for use on aircraft or guided missile prime movers only.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

3010 - Torque Converters and Speed Changers

Includes: Includes Fluid Couplings; Nonvehicular Clutches and Couplings; Horizontal Right Angle Drive Gear Units.

Excludes: Excludes Automotive Torque Converters (FSC 2520); Vehicular Power Transmission Components (FSC 2520); Rotary Aircraft Transmission Gear Units (FSC 1615).

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3130 - Bearings, Mounted

Includes: Includes Pillow Block Units; Cartridge Units; Flange Units; Takeup Units; Hanger Box Units; Flat Box Units; Step Box Units.

Excludes: Excludes Antifriction Bearings (FSC 3110); Plain Unmounted Bearings (FSC 3120).

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3439 - Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

Includes: Includes Soldering Irons; Welding Electrodes and Rods; Brazing Fluxes; Soldering Fluxes; Solder.

3460 - Machine Tool accessories

Includes:

Excludes: Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

3465 - Production Jigs, Fixtures, and Templates

Includes:

Note: Note-This class includes jigs, fixtures, and templates used in conjection with the metalworking machinery classified in Group 34. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in Group 49.

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4140 - Fans, Air Circulators, and Blower Equipment

Includes: Includes Wall Type Fans; Pedestal Type Fans; Household Type and Attic Type Exhaust Fans; Floor Fans; Forged Draft Exhaust and Disposal Kits; Fans, Air Circulators, and Blower Equipment, whether designated as "industrial" or "nonindustrial" by application and/or use.

Excludes: Excludes Combination Heater-Fans (FSC 4520).

Note: Note-Fans and impellers which are specifically designed for use with specific individual types of equipment are to be classified in the same classes as their next higher assemblies or in the appropriate components or accessories classes (as in Group 25 or 29 or Class 1680) as prescribed by the indexes and structure of the FSC.

4320 - Power and Hand Pumps

Includes:

Excludes: Excludes Laboratory Jet Pumps (FSG 65 and 66).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

4810 - Valves, Powered

Includes: Includes Electric Motor Operated Valves; Hydraulic Operated Valves; Solenoid Operated Valves.

Excludes: Excludes Engine Intake and Exhaust valves (FSC 2990, 2815); Valves specifically designed for use with fire fighting equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

4820 - Valves, Nonpowered

Includes: Includes Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.

Excludes: Excludes Fire Hydrants (FSC 4210); Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting Equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5120 - Hand Tools, Nonedged, Nonpowered

Includes: Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes: Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

See full contract details by trying BidLink Free for 7 days

Get complete contract details