DOD Contract : F0862693C0007 | F08626-93-C-0007

Federal Supply Classes for F0862693C0007

1420 - Guided Missile Components

Includes: Includes Structural Components; Components and Accessories Specially Designed for use on or with guided missiles, including Complete Gyro Mechanisms, Hydraulic Pumps, Automatic Pilot Mechanisms and Specially Designed Assemblies, and Electronic Guidance Equipment installed in missiles.

Excludes: Excludes Electronic Remote Guidance Equipment used to guide missiles; Solid and Liquid Propellant Units; Components of Gyro Mechanisms.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

4820 - Valves, Nonpowered

Includes: Includes Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.

Excludes: Excludes Fire Hydrants (FSC 4210); Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting Equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5355 - Knobs and Pointers

Includes: Includes Knobs, including Calibrated Knobs; Dials, Scale.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5840 - Radar Equipment, Except Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5841 - Radar Equipment, Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5895 - Miscellaneous Communication Equipment

Includes: Includes Modems.

Excludes: Excludes Electronic Countermeasures Equipment.

Note: Note-This class includes miscellaneous communication equipment that is not classified in more specific classes (see the NOTE for FSG 58).

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5940 - Lugs, Terminals, and Terminal Strips

Includes: Includes Binding Posts; Battery Clips; Stud Terminals; Test Clips.

Excludes: Excludes Caps, Electrical; Clips, Electrical; and Contacts, Electrical.

5950 - Coils and Transformers

Includes: Includes Coils, except ignition and magneto; coil assemblies; reactors; transformers.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5963 - Electronic Modules

Includes:

Excludes: Excludes MICROCIRCUITS; Electronic Test Equipment Plug-In Units.

Note: Note-The term "electronic module" as used in this class designates an electronic component designed for use in various equipment or end item applications, and capable of controlling voltage and/or current to produce gain, oscillation, switching, or similar integral electronic functions. It consists of a collection of miniaturized electronic parts and/or elements in a single replaceable package with plug-in mounting which will also complete the required electrical connections. It is not normally subject to disassembly as distinguished from such items as CIRCUIT CARD ASSEMBLY and ELECTRONIC COMPONENTS ASSEMBLY. These modules conform to industry or government specifications/standards that define all physical dimensions and electrical parameters required to promote commonality and ensure proper operational performance.

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5985 - Antennas, Waveguides, and Related Equipment

Includes: Includes Aerials; Masts; Tower Equipment; Attenuators; Couplers; Transmission Lines.

Excludes: Excludes Tower Structures.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

5998 - Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

Includes:

Excludes: Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

5999 - Miscellaneous Electrical and Electronic Components

Includes: Includes Permanent Magnets and Magnetostriction Elements; Caps, Clips, and Contacts, Electrical.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6615 - Automatic Pilot Mechanisms and Airborne Gyro Components

Includes: Includes Automatic Pilot Regulators; Directional, Vertical, Bank and Turn, and Hydraulic Surface Gyro Controls; Airborne and Shipborne Automatic Pilot Mechanisms; Helicopter Automatic Stabilization Equipment.

Excludes: Excludes Automatic Pilot Training Devices (FSC 6930); and Automatic Pilot Mechanisms, Guided Missile (FSC 1420).

Note: Note-Included in this class are gyro components of guided missiles. Excluded are complete gyro mechanisms and nonairborne gyro components, both of which are classified in the same classes as their next higher assemblies.