DOD Contract : F0960397G0022 | F09603-97-G-0022

Federal Supply Classes for F0960397G0022

1450 - Guided Missile Handling and Servicing Equipment

Includes: Includes Specially Designed Trucks and Trailers for use in transporting guided missiles; Specially Designed Slings, Hoists, Jacks, and Blowers; Self-propelled Vehicles and Trailers, Specially Designed for Guided Missile Handling or Servicing; Covers, Guided Missile; Conditioning Kits and Sets, Controlled Environment.

Excludes: Excludes Guided Missile Launchers (FSC 1440); Aircraft Handling and Servicing Equipment (FSC 1730).

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1610 - Aircraft Propellers and Components

Includes: Includes Aircraft Propellers; Propeller Blades, Cams, Cones, Hubs, Nuts, and Spinners; Test Clubs; Synchronizers; Power Control Units; Integral Oil Control Measures and Propeller Governors.

Excludes: Excludes Rotary Rudder and Rotary Wing Blades (FSC 1615).

1615 - Helicopter Rotor Blades, Drive Mechanisms and Components

Includes: Includes Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions.

Excludes: Excludes Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).

Note: Note-This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.

1620 - Aircraft Landing Gear Components

Includes: Includes Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes: Excludes Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3130 - Bearings, Mounted

Includes: Includes Pillow Block Units; Cartridge Units; Flange Units; Takeup Units; Hanger Box Units; Flat Box Units; Step Box Units.

Excludes: Excludes Antifriction Bearings (FSC 3110); Plain Unmounted Bearings (FSC 3120).

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5305 - Screws

Includes:

5306 - Bolts

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5841 - Radar Equipment, Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.