DOD Contract : F3460197G0006 | F34601-97-G-0006

Federal Supply Classes for F3460197G0006

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1660 - Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Includes: Includes Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes: Excludes Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Note: Note-This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

1740 - Airfield Specialized Trucks and Trailers

Includes: Includes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies; Trailers: Afterburner, Engine, Propeller, Fuselage, and Wing; Trucks, Aircraft Fuselage and Aircraft Wing; Skids, Engine Transport; Stands, Engine Transport; Bomb Trailers, Airfield; Trucks, Crashed Aircraft Removing.

Excludes: Excludes Airfield Specialized Lift Trucks (FSC 3930), and Trailers (FSC 2330); Highway Type Trucks (FSC 2320), and Trailers (FSC 2330); Cargo Loading and Unloading Trailers (FSC 2330) and Trucks (FSC 2320).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, and 2590.

2840 - Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Includes: Includes Compressor and Turbine Rotors; Blades; Combustion Chamber; Accessory Gear Box; Afterburner; Exhaust Cone; Reservoirs, Hydraulic; Tank, Oil.

Excludes: Excludes Oil, Air, Anti-icing, and Hydraulic Regulators, Valves, and Pumps specially designed for Gas Turbines and Jet Engines (FSC 2995); Control Assemblies, Push-Pull (FSC 2995); Engine Mounted Control Assemblies (FSC 2995); Fuel System Components (FSC 2915); Engine Electrical System Components (FSC 2925); Engine Cooling System Components (FSC 2935); Engine Air/Oil Cleaner/Filter/Strainers (FSC 2945).

Note: Note-Engines and Components classified in this FSC are intended for use as/on aircraft and/or guided missile prime movers.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.