DOD Contract : F4260094G7563 | F42600-94-G-7563

Federal Supply Classes for F4260094G7563

1260 - Fire Control Designating and Indicating Equipment

Includes: Includes Turret, Gun, Torpedo Mount, and Searchlight Indicating Equipment; Target Designating Equipment; Synchro Systems.

1615 - Helicopter Rotor Blades, Drive Mechanisms and Components

Includes: Includes Helicopter dynamic components and specially designed parts that transmit power from the aircraft power plant to the rotary wing and rotary rudder. Also included in this class are Rotors; Blades; Rotor Blade, Trim, Tabs; Blade Sets; Yokes; Clutches and Transmissions.

Excludes: Excludes Propellers (FSC 1610); Rotor Brake Systems Components (FSC 1630); Rotor Blade Hydraulic Folding System Components (FSC 1650); Hydraulic Servo System Components (FSC 1650).

Note: Note-This class includes miscellaneous component parts specifically designed for, and used exclusively in, helicopter drive mechanisms and rotor blades when not specifically classified elsewhere in the FSC indexes.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5305 - Screws

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5355 - Knobs and Pointers

Includes: Includes Knobs, including Calibrated Knobs; Dials, Scale.

5821 - Radio and Television Communication Equipment, Airborne

Includes: Includes Telemetering Equipment.

5895 - Miscellaneous Communication Equipment

Includes: Includes Modems.

Excludes: Excludes Electronic Countermeasures Equipment.

Note: Note-This class includes miscellaneous communication equipment that is not classified in more specific classes (see the NOTE for FSG 58).

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5950 - Coils and Transformers

Includes: Includes Coils, except ignition and magneto; coil assemblies; reactors; transformers.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

5998 - Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

Includes:

Excludes: Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

5999 - Miscellaneous Electrical and Electronic Components

Includes: Includes Permanent Magnets and Magnetostriction Elements; Caps, Clips, and Contacts, Electrical.

6020 - Fiber Optic Cable Assemblies and Harnesses

Includes:

Note: Note-Included in this class are items used for communication and/or data transmission having one or more fiber optic conductors/cables with processed end(s) or terminated in fitting(s). Excluded from this class are items used for illumination and/or image transmission.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6110 - Electrical Control Equipment

Includes: Includes Contactors; Motor Controllers; Power Servomechanisms; Switchgear; Voltage Regulators.

Excludes: Excludes Automatic Pilot Mechanisms; Relays; Resistors.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6220 - Electric Vehicular Lights and Fixtures

Includes: Includes Automotive, Marine, Railroad, and Aircraft Lights and Fixtures.

Excludes: Excludes Nonelectrical Vehicular Fixtures.

6605 - Navigational Instruments

Includes: Includes Azimuths; Sextants; Octants; Compasses; Plotting Boards; Underwater Log Equipment; Air Position Indicators; Drift Meters.

6610 - Flight Instruments

Includes: Includes Air Speed Indicators; Rate of Climb Indicators; Bank and Turn Indicators; Pitot Tubes; Gyro Horizon Indicators; Attitude Gyro Indicators.

Excludes: Excludes Navigational Instruments (FSC 6605).

6615 - Automatic Pilot Mechanisms and Airborne Gyro Components

Includes: Includes Automatic Pilot Regulators; Directional, Vertical, Bank and Turn, and Hydraulic Surface Gyro Controls; Airborne and Shipborne Automatic Pilot Mechanisms; Helicopter Automatic Stabilization Equipment.

Excludes: Excludes Automatic Pilot Training Devices (FSC 6930); and Automatic Pilot Mechanisms, Guided Missile (FSC 1420).

Note: Note-Included in this class are gyro components of guided missiles. Excluded are complete gyro mechanisms and nonairborne gyro components, both of which are classified in the same classes as their next higher assemblies.

6650 - Optical Instruments, Test Equipment, Components and Accessories

Includes: Includes Binoculars; Magnifiers; Microscopes; Periscopes; Telescopes; Optical Elements; such as Lens, Prisms, Windows; Optical Benches and Associated Devices; Endoscopes, Fiber Optics (Non-Medical).

Excludes: Excludes Fire Control Instruments, Optical; Surveying Instruments, Optical; Photogrammetric Instruments; Octants; and Sextants; Optical Instruments Integrated with Fire Control Equipment; Opthalmological Instruments; Electronic Fiber Optic Test Equipment; Medical Endoscopes.

6695 - Combination and Miscellaneous Instruments

Includes: Includes Flow-Pressure Instruments; Taximeters; Dynamometers.

Excludes: Excludes Dental, Medical, Surgical, and Veterinary Instruments.