DOD Contract : SP040004AB689 | SP0400-04-A-B689

Federal Supply Classes for SP040004AB689

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

2835 - Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Includes: Includes Airflow Deflectors; Combustion Chambers, Compressors, Turbines, Accessory Gear Boxes and their Components.

Excludes: Excludes Components for Gas Turbines and Jet Engines, Aircraft Prime Mover (FSC 2840); Engine Fuel Systems (FSC 2910); Engine Electrical Systems (FSC 2920); Engine Cooling Systems (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Note: Note-Engines and Components classified in this FSC are primarily for use on non-aircraft prime mover (e.g., Naval ship applications), aircraft non-prime mover (e.g., airframe mounted auxiliary power units), and for aircraft ground support equipment (e.g., start carts).

2915 - Engine Fuel System Components, Aircraft and Missile Prime Movers

Includes: Includes Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Controls, Jet Engine; Fuel Primers; Water Injection Controls and Valves; Fuel Valves Fuel Flow Regulators; Components of Smoke Abatement Systems.

Excludes: Excludes Aircraft Fuel Tanks (FSC 1560); In-flight Refueling System Fuel Components (FSC 1680). Fuel System Components not specifically designed for use with Aircraft Engines or Missile Prime-movers.

Note: Note-Fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this FSC.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3130 - Bearings, Mounted

Includes: Includes Pillow Block Units; Cartridge Units; Flange Units; Takeup Units; Hanger Box Units; Flat Box Units; Step Box Units.

Excludes: Excludes Antifriction Bearings (FSC 3110); Plain Unmounted Bearings (FSC 3120).

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3439 - Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

Includes: Includes Soldering Irons; Welding Electrodes and Rods; Brazing Fluxes; Soldering Fluxes; Solder.

3455 - Cutting Tools for Machine Tools

Includes: Includes Broaches; Files; Milling Cutters; Reamers; Saws.

Excludes: Excludes Flame Cutting Tools.

3460 - Machine Tool accessories

Includes:

Excludes: Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5826 - Radio Navigation Equipment, Airborne

Includes: Includes Loran Equipment; Shoran Equipment; Direction Finding Equipment.

5841 - Radar Equipment, Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6110 - Electrical Control Equipment

Includes: Includes Contactors; Motor Controllers; Power Servomechanisms; Switchgear; Voltage Regulators.

Excludes: Excludes Automatic Pilot Mechanisms; Relays; Resistors.

6125 - Converters, Electrical, Rotating

Includes: Includes Complete Battery Charging Equipment, Rotating; Dynamotors; Motor-Converters; Motor-Generator Sets; Phase Converters; Rotating Equipment; Synchronous Converters.

Excludes: Excludes Nonrotating Equipment.

Note: Note-This class includes devices employing mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC). Excluded from this class are electrical generators and generator sets (FSC 6115).

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6140 - Batteries, Rechargeable

Includes: Includes Rechargeable Cells and Batteries.

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6160 - Miscellaneous Battery Retaining Fixtures, Liners and Ancillary Items

Includes: Includes Battery Boxes, Covers, Liners, Racks, Retainers, and Trays.

6340 - Aircraft Alarm and Signal Systems

Includes: Includes Oxygen Pressure Signals and Warning Devices; such as Air Pressure Warning Signals, Aircraft Crew Warning Signals, Altitude Warning Signals, Alarm Controls, Audible Landing Gear Alarms.

Excludes: Excludes Aircraft Engine Oil and Fuel Warning Devices.

6605 - Navigational Instruments

Includes: Includes Azimuths; Sextants; Octants; Compasses; Plotting Boards; Underwater Log Equipment; Air Position Indicators; Drift Meters.

6610 - Flight Instruments

Includes: Includes Air Speed Indicators; Rate of Climb Indicators; Bank and Turn Indicators; Pitot Tubes; Gyro Horizon Indicators; Attitude Gyro Indicators.

Excludes: Excludes Navigational Instruments (FSC 6605).

6615 - Automatic Pilot Mechanisms and Airborne Gyro Components

Includes: Includes Automatic Pilot Regulators; Directional, Vertical, Bank and Turn, and Hydraulic Surface Gyro Controls; Airborne and Shipborne Automatic Pilot Mechanisms; Helicopter Automatic Stabilization Equipment.

Excludes: Excludes Automatic Pilot Training Devices (FSC 6930); and Automatic Pilot Mechanisms, Guided Missile (FSC 1420).

Note: Note-Included in this class are gyro components of guided missiles. Excluded are complete gyro mechanisms and nonairborne gyro components, both of which are classified in the same classes as their next higher assemblies.

6620 - Engine Instruments

Includes: Includes All Engine Instruments, including Aircraft, Marine, and Vehicular; Fuel Pressure Gages; Manifold Pressure Gages; Oil Pressure Gages; Fuel Mixture Indicators; Engine Oil and Fuel Warning Devices.

Note: Note-Instruments designed for use on both engines and other than engines are not included in this class and should be classified in the appropriate instruments class of Group 66.

6635 - Physical Properties Testing and Inspection

Includes: Includes Destructive and Nondestructive Inspection Equipment such as Fluorescent Penetrant Inspection Units; Magnetic Inspection Units; Industrial X-Ray Machines; Industrial X-Ray Film; Tensiometers; Material Hardness Testers.

Excludes: Excludes General Purpose Measuring Tools (FSC 5210) and Precision Measuring Tools and Inspection Gages (FSC 5220).

6645 - Time Measuring Instruments

Includes: Includes Clocks; Job Recording Devices; Time Recorders; Time Stamps, Watch and Clock Movements; Watches.

6665 - Hazard-Detecting Instruments and Apparatus

Includes: Includes Radiac Equipment; Gas Detecting Equipment; Land Mine Detecting Equipment.

Excludes: Excludes Manual Gas Alarms (FSC 6350).

6680 - Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments

Includes: Includes Liquid Level Float Instruments; Revolution Counters; Speedometers; Rotation Measuring Instruments and Apparatus; Oxygen Flow Indicators; Tachometers, including Engine Tachometers.

Excludes: Excludes Combination Instruments; (FSC 6695); Meteorological Instruments (FSC 6660); and Automatic Control Valves (FSG 48).

6685 - Pressure, Temperature, and Humidity Measuring and Controlling Instruments

Includes: Includes Thermometers, including Engine Thermometers; Pressure Gages; Thermocouple Leads; Resistance Bulbs.

Excludes: Excludes Clinical Therometers; (FSC 6515); Thermostatic and Differential Pressure Switches (FSC 5930); and Meteorological Instruments (FSC 6660).

6695 - Combination and Miscellaneous Instruments

Includes: Includes Flow-Pressure Instruments; Taximeters; Dynamometers.

Excludes: Excludes Dental, Medical, Surgical, and Veterinary Instruments.