DOD Contract : SP040005AAC75 | SP0400-05-A-AC75

Federal Supply Classes for SP040005AAC75

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1610 - Aircraft Propellers and Components

Includes: Includes Aircraft Propellers; Propeller Blades, Cams, Cones, Hubs, Nuts, and Spinners; Test Clubs; Synchronizers; Power Control Units; Integral Oil Control Measures and Propeller Governors.

Excludes: Excludes Rotary Rudder and Rotary Wing Blades (FSC 1615).

1620 - Aircraft Landing Gear Components

Includes: Includes Shock Struts and Components; Installation Elements, such as Torsion Bars, Vibration Links, Drag Struts; Landing Gear Trunions, Axles and Shimmy Dampeners; Specially designed hydraulic power steering system components.

Excludes: Excludes Mounting Braces and Mounting Plates permanently installed on aircraft (FSC 1680); Landing Wheels, Skis, and Floats (FSC 1630); Wheel Brakes and Wheel Brake Cylinders (FSC 1630).

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3405 - Saws and Filing Machines

Includes: Includes Cutoff Machines; Saw Blade Dressing Machines; Retoothing Machines.

3413 - Drilling and Tapping Machines

Includes: Includes Multiple Spindle Drilling-Tapping Machines.

Excludes: Excludes Way-Type Machines.

3415 - Grinding Machines

Includes:

Excludes: Excludes Electrolytic Grinding Machines.

3416 - Lathes

Includes: Includes Screw Machines

Excludes: Excludes Speed Lathes; Metal Spinning Lathes; Cartridge Case and Shell Lathes.

3419 - Miscellaneous Machine Tools

Includes: Includes Gun Rifling Machines; Speed Lathes.

3431 - Electric Arc Welding Equipment

Includes: Includes Gas Shielded Arc Welding Machines; Arc Bonding Machines; Semi-Automatic and Automatic Arc Welding Machines.

Excludes: Excludes Welding Supplies, and Associated Equipment such as: Flux Recovery Mchines; Flux Dispensers; Tacker Panels; Welding Panels.

3433 - Gas Welding, Heat Cutting, and Metalizing Equipment

Includes: Includes Metal Spray Guns; Arc Cutting Machines; Torches and Tips; Gas Brazing Machines; Flame Cutting Machines; Vacuum Metalizers; Spark Discharge Metalizers.

Excludes: Excludes Welding Supplies; Disintegrating Machines.

3439 - Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

Includes: Includes Soldering Irons; Welding Electrodes and Rods; Brazing Fluxes; Soldering Fluxes; Solder.

3441 - Bending and Forming Machines

Includes:

Excludes: Excludes Wire and Metal Ribbon Forming Machines.

3444 - Manual Presses

Includes: Includes Arbor, Straightening, Forcing, and Assembly Presses.

3445 - Punching and Shearing Machines

Includes:

3455 - Cutting Tools for Machine Tools

Includes: Includes Broaches; Files; Milling Cutters; Reamers; Saws.

Excludes: Excludes Flame Cutting Tools.

3460 - Machine Tool accessories

Includes:

Excludes: Excludes Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

3465 - Production Jigs, Fixtures, and Templates

Includes:

Note: Note-This class includes jigs, fixtures, and templates used in conjection with the metalworking machinery classified in Group 34. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in Group 49.

3655 - Gas Generating and Dispensing Systems, Fixed or Mobile

Includes:

Excludes: Excludes Meteorological Equipment.

Note: Note-Included in this class are gaseous dispensing systems, both mobile and installed. Includes liquefied gaseous storage tanks, mounted on a common base with, or integral to, gas generating equipment included in this class. Also includes those liquefied gaseous storage tanks, either trailer mounted or skid mounted, used to store liquefied gaseous products until needed. Excluded from this class are those storage tanks designed to be used as an integral part of guided missile propellant servicing trailers, rocket power plants or test stations, and aircraft oxygen converters which are classified as specified by the indexes and structure of the FSC.

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5940 - Lugs, Terminals, and Terminal Strips

Includes: Includes Binding Posts; Battery Clips; Stud Terminals; Test Clips.

Excludes: Excludes Caps, Electrical; Clips, Electrical; and Contacts, Electrical.

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5977 - Electrical Contact Brushes and Electrodes

Includes: Includes Brushes for electrical rotating equipment; Carbon Stock for Brushes; Brush Arm and Holders; Lighting Electrodes.

Excludes: Excludes Anodes; Cathodes; Welding Electrodes.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6110 - Electrical Control Equipment

Includes: Includes Contactors; Motor Controllers; Power Servomechanisms; Switchgear; Voltage Regulators.

Excludes: Excludes Automatic Pilot Mechanisms; Relays; Resistors.

6115 - Generators and Generator Sets, Electrical

Includes: Includes Engine, Turbine, Wind, and Hand Driven Generator Sets and Auxiliary Aircraft Generators.

Excludes: Excludes Motor-Converters; Motor-Generator Sets; Engine Generators; Engine Accessory Generators.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6140 - Batteries, Rechargeable

Includes: Includes Rechargeable Cells and Batteries.