DOD Contract : SPE4A121G0019 | SPE4A1-21-G-0019

Federal Supply Classes for SPE4A121G0019

1270 - Aircraft Gunnery Fire Control Components

Includes: Includes Turrets, Aircraft; Computers, specifically designed; Complete Gyro Mechanisms.

Excludes: Excludes Gun Chargers; Ammunition Boxes; Gun Heaters; Field and Link Chutes; Ammunition Boosters; Gyro Components; Complete Fire Control Systems.

1430 - Guided Missile Remote Control Systems

Includes: Includes Specially Designed Components of Guided Missile Remote Control Systems.

Excludes: Excludes Guided Missile Internal (Built-in) Control Systems; Components used in both guided missiles and other than guided missiles (including fire control components).

Note: Note-This class includes airborne and nonairborne guided missile remote control systems, components, and accessories, designed specifically for use therewith. Excluded from this class are fire control assemblies, subassemblies, and components modified for use with guided missile remote control systems, and fire control assemblies designed specifically for shipboard use.

1660 - Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Includes: Includes Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes: Excludes Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Note: Note-This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

3020 - Gears, Pulleys, Sprockets, and Transmission Chain

Includes: Includes Power Transmission Chain; Matched Gear Sets.

Excludes: Excludes Reduction Gears (FSC 3010).

3940 - Blocks, Tackle, Rigging, and Slings

Includes:

Excludes: Excludes Load Chain; Chain and Metal Rope Fittings; Wire Rope; Hoists; Ship Rigging.

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

4820 - Valves, Nonpowered

Includes: Includes Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.

Excludes: Excludes Fire Hydrants (FSC 4210); Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting Equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5841 - Radar Equipment, Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5865 - Electronic Countermeasures, Counter-Countermeasures and Quick Reaction Capability Equipment

Includes:

Note: Note-This class includes, and is restricted to, passive and active electronic equipment, systems, and subsystems designed to prevent or reduce an enemy's effective use of radiated electromagnetic energy or designed to insure our own effective use of radiated electromagnetic energy. Includes Electronic Countermeasures, Electronic Counter-Countermeasures, Electronic Support Measures, and Quick Reaction Capability Equipment and components specially designed therefore which are not classifiable elsewhere in the FSC Structure. Excluded from this class are non-electronic items which are properly classified in more specific classes in accordance with the FSC structure and indexes.

5895 - Miscellaneous Communication Equipment

Includes: Includes Modems.

Excludes: Excludes Electronic Countermeasures Equipment.

Note: Note-This class includes miscellaneous communication equipment that is not classified in more specific classes (see the NOTE for FSG 58).

5905 - Resistors

Includes: Includes Varistors; Resistive ballast Tubes; Rheostats; Resistor Networks; Resistor Mounting Hardware; Thermistors.

Excludes: Excludes Resistance Wire.

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5945 - Relays and Solenoids

Includes: Includes Electromagnetic Actuators.

Excludes: Excludes Contractors.

5950 - Coils and Transformers

Includes: Includes Coils, except ignition and magneto; coil assemblies; reactors; transformers.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5985 - Antennas, Waveguides, and Related Equipment

Includes: Includes Aerials; Masts; Tower Equipment; Attenuators; Couplers; Transmission Lines.

Excludes: Excludes Tower Structures.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

5998 - Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

Includes:

Excludes: Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

6135 - Batteries, Nonrechargeable

Includes: Includes Cells and Dry Batteries; Nuclear Batteries.

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6160 - Miscellaneous Battery Retaining Fixtures, Liners and Ancillary Items

Includes: Includes Battery Boxes, Covers, Liners, Racks, Retainers, and Trays.

7025 - ADP Input/Output and Storage Devices

Includes:

Note: Note-This class includes devices used to control and transfer information to and from a Computer (as modified). The input device is used for transferring data and instructions into a computer. The output device is used to transfer results of processing by the computer to ADP peripheral devices. Input/output devices combine the above functions in the same device. This class includes printers, display units, disk drive units (magnetic, optical and floptical), tape drive units, terminals, data entry devices and transfer units. Also includes Optical Compact Disk (CD) devices used for the storage and retrieval of data and firmware.