DOD Contract : SPE74002D9719 | SPE740-02-D-9719

Federal Supply Classes for SPE74002D9719

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1660 - Aircraft Air Conditioning, Heating, and Pressurizing Equipment

Includes: Includes Cabin Supercharging Equipment; Canisters; Cylinder Assemblies; Masks; Fixed Oxygen System; Specially Designed Aircraft Valves; Cabin Pressure Regulators; Heat Exchangers; Air Expansion Turbines; Aircraft Heaters; Ventilating System Components; Air Conditioning and Heating Duct Assemblies; Thermal De-icing Equipment; Cabin and Compartment Pressurizing Equipment; Air Diffusers; Cabin Pressure Selectors; Liquid Oxygen Converters.

Excludes: Excludes Oxygen Pressure Signals and Warning Devices; Tubing; Ground Type Heaters and Coolers; Pressurizing Equipment other than that used for Cabin and Compartment Pressurization; Fluid De-icing Equipment; Valves specifically designed for use with Aircraft Engines, Guided Missiles, and Guided Missile Engines.

Note: Note-This class includes components specifically designed for use in aircraft air conditioning, heating, and pressurizing equipment. Also included are specially designed components of oxygen breathing systems used in aircraft.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

2835 - Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Includes: Includes Airflow Deflectors; Combustion Chambers, Compressors, Turbines, Accessory Gear Boxes and their Components.

Excludes: Excludes Components for Gas Turbines and Jet Engines, Aircraft Prime Mover (FSC 2840); Engine Fuel Systems (FSC 2910); Engine Electrical Systems (FSC 2920); Engine Cooling Systems (FSC 2930); Engine Air/Oil Cleaners/Filters/Strainers (FSC 2940); Engine Accessories (Air Duct Heaters, Engine Mounted Control Assemblies) (FSC 2990).

Note: Note-Engines and Components classified in this FSC are primarily for use on non-aircraft prime mover (e.g., Naval ship applications), aircraft non-prime mover (e.g., airframe mounted auxiliary power units), and for aircraft ground support equipment (e.g., start carts).

2915 - Engine Fuel System Components, Aircraft and Missile Prime Movers

Includes: Includes Carburetors; Fuel Pumps; Engine Fuel Filters; Fuel Controls, Jet Engine; Fuel Primers; Water Injection Controls and Valves; Fuel Valves Fuel Flow Regulators; Components of Smoke Abatement Systems.

Excludes: Excludes Aircraft Fuel Tanks (FSC 1560); In-flight Refueling System Fuel Components (FSC 1680). Fuel System Components not specifically designed for use with Aircraft Engines or Missile Prime-movers.

Note: Note-Fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this FSC.

2925 - Engine Electrical System Components, Aircraft Prime Moving

Includes: Includes Magnetos; Igniters (Spark Plugs); Ignition Coils; Ignition Distributors; Engine Voltage Regulators; Ignition Harness Assemblies; Starting Motors for Engines; Engine Accessory Generators.

Excludes: Excludes Aircraft Lighting Fixtures (FSC 6220); Auxiliary Aircraft Generators (FSC 6115).

Note: Note-Items designed for specific use on aircraft and guided missile prime movers are to be placed in this FSC.

2940 - Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft

Includes: Includes Components for all Engines except Aircraft and Guided Missile Prime Moving.

Excludes: Excludes Air and Oil Filters (FSC 4310, 4330), Strainers (FSC 4730) and Cleaners (FSC 4310) not specifically designed for use with engines.

2995 - Miscellaneous Engine Accessories, Aircraft

Includes: Includes Engine Dynafocal Suspension Mounts; Engine Cowling Mounts; Engine Mounted Control Assemblies; Pneumatic Starters; Push-Pull Control Assemblies;Specially designed Jet Engine Air, Oil, Anti-icing and Hydraulic Regulators; Valves and Pumps; Starting Units.

Excludes: Excludes Exhaust System; (FSC 1560); Jet Engine Hydraulic Reservoirs (FSC 2840); Jet Engine Oil Tanks (FSC 2840); Electrical Starters (FSC 2925); Cockpit Mounted Control Quadrants (FSC 1680); Aircraft Engine Covers (FSC 1730).

Note: Note-Items classified in this class must be specifically designed for use with aircraft or quided missile primemovers only.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3110 - Bearings, Antifriction, Unmounted

Includes: Includes Ball Bearings; Roller Bearings; Balls; Races.

Excludes: Excludes Plain Bearings (FSC 3120); Jewel Bearings (FSC 3120)

Note: Note-This class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

4310 - Compressors and Vacuum Pumps

Includes: Includes Truck Mounted and Trailer Mounted Compressors.

Excludes: Excludes Refrigeration Compressors (FSC 4130).

4330 - Centrifugals, Separators, and Pressure and Vacuum Filters

Includes:

Excludes: Excludes Laboratory Centrifuges (FSG 65 and 66); Water Purification Filters (FSC 4610).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

4810 - Valves, Powered

Includes: Includes Electric Motor Operated Valves; Hydraulic Operated Valves; Solenoid Operated Valves.

Excludes: Excludes Engine Intake and Exhaust valves (FSC 2990, 2815); Valves specifically designed for use with fire fighting equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

4820 - Valves, Nonpowered

Includes: Includes Automatic Nonpowered Valves; Gate, Globe, Angle, Check, and Relief Valves; Cocks.

Excludes: Excludes Fire Hydrants (FSC 4210); Sprinkler Heads (FSC 4210); Valves specifically designed for use with fire fighting Equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).

5305 - Screws

Includes:

5306 - Bolts

Includes:

5307 - Studs

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6680 - Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments

Includes: Includes Liquid Level Float Instruments; Revolution Counters; Speedometers; Rotation Measuring Instruments and Apparatus; Oxygen Flow Indicators; Tachometers, including Engine Tachometers.

Excludes: Excludes Combination Instruments; (FSC 6695); Meteorological Instruments (FSC 6660); and Automatic Control Valves (FSG 48).