DOD Contract : SPM4A111G0005 | SPM4A1-11-G-0005

Federal Supply Classes for SPM4A111G0005

1270 - Aircraft Gunnery Fire Control Components

Includes: Includes Turrets, Aircraft; Computers, specifically designed; Complete Gyro Mechanisms.

Excludes: Excludes Gun Chargers; Ammunition Boxes; Gun Heaters; Field and Link Chutes; Ammunition Boosters; Gyro Components; Complete Fire Control Systems.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

4320 - Power and Hand Pumps

Includes:

Excludes: Excludes Laboratory Jet Pumps (FSG 65 and 66).

4330 - Centrifugals, Separators, and Pressure and Vacuum Filters

Includes:

Excludes: Excludes Laboratory Centrifuges (FSG 65 and 66); Water Purification Filters (FSC 4610).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

5120 - Hand Tools, Nonedged, Nonpowered

Includes: Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes: Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

5306 - Bolts

Includes:

5307 - Studs

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5840 - Radar Equipment, Except Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5841 - Radar Equipment, Airborne

Includes:

Note: Note-Radar assemblies and subassemblies designed specifically for use with fire control equipment or guided missiles are excluded from this class and are included in the appropriate classes of Group 12 or Group 14.

5865 - Electronic Countermeasures, Counter-Countermeasures and Quick Reaction Capability Equipment

Includes:

Note: Note-This class includes, and is restricted to, passive and active electronic equipment, systems, and subsystems designed to prevent or reduce an enemy's effective use of radiated electromagnetic energy or designed to insure our own effective use of radiated electromagnetic energy. Includes Electronic Countermeasures, Electronic Counter-Countermeasures, Electronic Support Measures, and Quick Reaction Capability Equipment and components specially designed therefore which are not classifiable elsewhere in the FSC Structure. Excluded from this class are non-electronic items which are properly classified in more specific classes in accordance with the FSC structure and indexes.

5905 - Resistors

Includes: Includes Varistors; Resistive ballast Tubes; Rheostats; Resistor Networks; Resistor Mounting Hardware; Thermistors.

Excludes: Excludes Resistance Wire.

5910 - Capacitors

Includes: Includes Interference Filter Capacitors; Capacitor Mounting Hardware.

Excludes: Excludes Semiconductor Devices and Associated Hardware.

5915 - Filters and Networks

Includes:

Note: Note-This class includes those filters and networks which consist of a combination of resistors, capacitors, or coils, but not a combination of resistors only (classified in 5905), capacitors only (classified in 5910), or coils only (classified in 5950).

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5940 - Lugs, Terminals, and Terminal Strips

Includes: Includes Binding Posts; Battery Clips; Stud Terminals; Test Clips.

Excludes: Excludes Caps, Electrical; Clips, Electrical; and Contacts, Electrical.

5945 - Relays and Solenoids

Includes: Includes Electromagnetic Actuators.

Excludes: Excludes Contractors.

5950 - Coils and Transformers

Includes: Includes Coils, except ignition and magneto; coil assemblies; reactors; transformers.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5985 - Antennas, Waveguides, and Related Equipment

Includes: Includes Aerials; Masts; Tower Equipment; Attenuators; Couplers; Transmission Lines.

Excludes: Excludes Tower Structures.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

5998 - Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

Includes:

Excludes: Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

5999 - Miscellaneous Electrical and Electronic Components

Includes: Includes Permanent Magnets and Magnetostriction Elements; Caps, Clips, and Contacts, Electrical.