DOD Contract : SPRMM113G1103 | SPRMM1-13-G-1103

Federal Supply Classes for SPRMM113G1103

1005 - Guns, through 30mm

Includes: Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes: Excludes Turrets, Aircraft.

1020 - Guns, over 125mm through 150mm

Includes: Includes Breech Mechanisms; Power Drives; Gun Shields.

1055 - Launchers, Rocket and Pyrotechnic

Includes: Includes Airborne Rocket Launchers adaptable to guided missile use.

Excludes: Excludes Specifically designed Airborne Guided Missile Launchers; Jettisonable Rocket Launchers; Launcher Fairings designed for specific airframes; Rifle Grenade Launchers; Grenade Launchers for Integral-Cartridge Grenades, Single-Shot or Auto-Loading or Automatic Firing.

1090 - Assemblies Interchangeable Between Weapons in Two or More Classes

Includes: Includes Components and Accessories used on or with weapons falling in two or more classes of Group 10.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

2030 - Deck Machinery

Includes: Includes Steering Gears and Controls; Boat Davits.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3950 - Winches, Hoists, Cranes, and Derricks

Includes: Includes Windlasses: Capstans: Ore Bridges: Gypsies: Warehouse Cranes: Wharf Cranes, Mobile or Fixed: Overhead Traveling Cranes.

Excludes: Excludes Crane-Shovels (FSC 3810); Barge Mounted Cranes (FSC 1935); Winches for Integral Mounting on Trucks or Tractors (FSC 3830); Locomotive Cranes (FSC 2230).

4010 - Chain and Wire Rope

Includes: Includes Bead Chain; Weldless Chain; Single Leg Chain Assemblies; Wire Rope; Wire Cord; Single Leg Wire Assemblies.

Excludes: Excludes Power Transmission Chain (FSC 3020); Slings.

Note: Note-Chain and wire rope, with attachments or terminations will be classified in this class when they are for general use. a. Chain is a series of flexible links and/or rings fitted into one another used for supporting, lifting,restraining, dragging, or transmitting power. b. Wire rope is formed from strands of twisted wire.

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

5305 - Screws

Includes:

5306 - Bolts

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5330 - Packing and Gasket Materials

Includes: Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes: Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Note: Note-This FSC includes only seals and gaskets designed for standard use. Seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. Similar materials used to make seals, gaskets, and packing are available in bulk form, refer to FSG 93, FSG 80, and FSG 83.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5355 - Knobs and Pointers

Includes: Includes Knobs, including Calibrated Knobs; Dials, Scale.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

5365 - Bushings, Rings, Shims, and Spacers

Includes: Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes: Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Note: Note-All items, including specially designed, will be classified in this FSC. a. A bushing is cylindrical in shape, hollow, and designed primarily to be inserted into a hole to reduce the effective inside diameter of the hole, and to protect the body structure about the hole from damage resulting from stress, strain, and vibration. b. A ring is cylindrical in shape, usually flat with a center hole. Rings are multi-applicational. See specific item name for designated usage. c. A shim is a thin, sometimes tapered, piece of material used to fill in space between things. See specific item name for dimensional parameters. d. A spacer is a device for holding two members at a given distance from each other.

5930 - Switches

Includes: Includes Rotary, Knife, Toggle, Push Button, Mercury, Thermostatic, and Differential Pressure Switches.

Excludes: Excludes Switchgear.

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5950 - Coils and Transformers

Includes: Includes Coils, except ignition and magneto; coil assemblies; reactors; transformers.

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6685 - Pressure, Temperature, and Humidity Measuring and Controlling Instruments

Includes: Includes Thermometers, including Engine Thermometers; Pressure Gages; Thermocouple Leads; Resistance Bulbs.

Excludes: Excludes Clinical Therometers; (FSC 6515); Thermostatic and Differential Pressure Switches (FSC 5930); and Meteorological Instruments (FSC 6660).

7690 - Miscellaneous Printed Matter

Includes: Includes Decals; Printed Posters; Printed Labels.

Excludes: Excludes Sheet and Book Music.

9320 - Rubber Fabricated Materials

Includes: Includes Natural and Synthetic Rubber Fabricated Materials, such as Rubber Sheets, Structural Rubber Shapes, Strips.

U009 - Education Services