DOD Contract : SPRPA109G006X | SPRPA1-09-G-006X

Federal Supply Classes for SPRPA109G006X

1095 - Miscellaneous Weapons

Includes: Includes Line Throwing Guns; Catapult Guns; Bayonets; Saluting Guns; Signal Guns; Flare Guns; Barrage Balloons; Accessories, not elsewhere classifiable, for weapons in this group; Expendable Bomb Dispensers.

1440 - Launchers, Guided Missile

Includes: Includes Airborne and Nonairborne Guided Missile Launchers.

Excludes: Excludes Aircraft Launchers; Rocket Launchers.

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1650 - Aircraft Hydraulic, Vacuum, and De-icing System Components

Includes: Includes Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes: Excludes Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Note: Note-This class includes only those components specifically designed for aircraft use.

1670 - Parachutes; Aerial Pick Up, Delivery, Recovery Systems; and Cargo Tie Down Equipment

Includes:

Excludes: Excludes Fitting Assemblies built into the aircraft structure.

Note: Note-Includes specifically designed items, sets, and systems for air-to-air, air-to-surface, and surface-to-air delivery, pick up, and recovery operations, unless parts, attachments, assemblies, for use in or on such systems (i.e., space vehicle aerial recovery systems) are specifically indexed to other classes of the FSC (i.e., Transmitting Radio Buoys and Direction Finding Subsystem Components).

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

3010 - Torque Converters and Speed Changers

Includes: Includes Fluid Couplings; Nonvehicular Clutches and Couplings; Horizontal Right Angle Drive Gear Units.

Excludes: Excludes Automotive Torque Converters (FSC 2520); Vehicular Power Transmission Components (FSC 2520); Rotary Aircraft Transmission Gear Units (FSC 1615).

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

3120 - Bearings, Plain, Unmounted

Includes: Includes Sleeve Bearings; Split Bearings; Washer Type Bearings; Jewel Bearings.

Excludes: Excludes Antifriction Bearings (FSC 3110); Mounted Bearings (FSC 3130).

Note: Note-Bearings in this class are generally one piece that retain and position moving and/or rotating parts. They may have lubrication grooves/fittings/facilities or include pre-lubrication.

3950 - Winches, Hoists, Cranes, and Derricks

Includes: Includes Windlasses: Capstans: Ore Bridges: Gypsies: Warehouse Cranes: Wharf Cranes, Mobile or Fixed: Overhead Traveling Cranes.

Excludes: Excludes Crane-Shovels (FSC 3810); Barge Mounted Cranes (FSC 1935); Winches for Integral Mounting on Trucks or Tractors (FSC 3830); Locomotive Cranes (FSC 2230).

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4720 - Hose and Flexible Tubing

Includes: Includes Air Duct, Metallic, Nonmetallic, and Textile Fiber Hoses and their assemblies; Flexible Tubing and their assemblies.

Excludes: Excludes Conduit and their assemblies (FSC 5975); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515); Rigid Tubing and their assemblies (FSC 4710).

4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes: Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes: Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

4935 - Guided Missile Maintenance, Repair, and Checkout Specialized Equipment

Includes: Includes Checkout equipment and test equipment specially designed for use with guided missiles and guided missile remote control systems.

Excludes: Excludes Specially designed internal (built-in) checkout equipment for guided missile remote control systems; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters, ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5120 - Hand Tools, Nonedged, Nonpowered

Includes: Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes: Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

5220 - Inspection Gages and Precision Layout Tools

Includes: Includes Go and Not-Go Gages, including Plug, Ring, Snap, Thread, and Length Gages; Profile Gages; Fixture Gages; Special Inspection Gages.

Note: Note-Special inspection gages are included in this class.

5305 - Screws

Includes:

5310 - Nuts and Washers

Includes: Includes Locknuts; Eye Nuts; Plain Nuts; Castellated Nuts; Wing Nuts; Plate Nuts; Push on Nuts; Concave and Convex Washers; Flat Washers; Keyed Washers; Lock Washers; Shouldered Washers; Split Washers.

Excludes: Excludes Bearing Thrust Washers (FSC 3120); Shims (FSC 5365); Ring Spacers (FSC 5365); Plate Spacers (FSC 5365); Lock Rings (FSC 5365).

Note: Note-Nuts and washers, including specially designed, are to be classified in this FSC. a. Nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. Washers are a perforated piece of metal, leather, or other materials of various shapes or forms. They are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5325 - Fastening Devices

Includes: Includes Eyelets; Grommets; Aircraft Cowling Fasteners; Textile Fasteners; Retaining Rings; Threaded Inserts.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5355 - Knobs and Pointers

Includes: Includes Knobs, including Calibrated Knobs; Dials, Scale.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

5895 - Miscellaneous Communication Equipment

Includes: Includes Modems.

Excludes: Excludes Electronic Countermeasures Equipment.

Note: Note-This class includes miscellaneous communication equipment that is not classified in more specific classes (see the NOTE for FSG 58).

5925 - Circuit Breakers

Includes: Includes Circuit Breakers and Cutouts.

Excludes: Excludes Relays.

5930 - Switches

Includes: Includes Rotary, Knife, Toggle, Push Button, Mercury, Thermostatic, and Differential Pressure Switches.

Excludes: Excludes Switchgear.

5935 - Connectors, Electrical

Includes: Includes Plugs; Jacks; Receptacles, Electronic Component Sockets and Associated Accessories

Excludes: Excludes Interconnectors, Fiber Optic

5945 - Relays and Solenoids

Includes: Includes Electromagnetic Actuators.

Excludes: Excludes Contractors.

5961 - Semiconductor Devices and Associated Hardware

Includes: Includes Semiconductor Assemblies; Semiconductor Diodes; Semiconductor Rectifiers, Semiconductor Thyristors; Transistors; Unitized Semiconductors; Associated Hardware except Sockets.

Excludes: Excludes Microcircuits; Optoelectronic Devices and Associated Hardware.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5970 - Electrical Insulators and Insulating Materials

Includes: Includes Tube, Knob, Cleat, Strain, and Standoff Insulators; Feed Thru Insulators; Bead Insulators; Varnish Cambric Tape; Friction Tape.

5975 - Electrical Hardware and Supplies

Includes: Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

5985 - Antennas, Waveguides, and Related Equipment

Includes: Includes Aerials; Masts; Tower Equipment; Attenuators; Couplers; Transmission Lines.

Excludes: Excludes Tower Structures.