DOD Contract : SPRPA115G001X | SPRPA1-15-G-001X

Federal Supply Classes for SPRPA115G001X

1440 - Launchers, Guided Missile

Includes: Includes Airborne and Nonairborne Guided Missile Launchers.

Excludes: Excludes Aircraft Launchers; Rocket Launchers.

1560 - Airframe Structural Components

Includes: Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes: Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Note: Note-This class includes fabricated system parts that are permanently attached or peculiar to the integral airframe of an aircraft, such as support structural components, spars, ribs, ailerons, stabilizers, bulkheads.

1650 - Aircraft Hydraulic, Vacuum, and De-icing System Components

Includes: Includes Hydraulic and Pneumatic Accumulators, Pumps, Motors, Actuating Cylinders, and Filters; De-icing Boots; Fluid Type De-icing Pumps, Valves and Filters; Vacuum System Oil Separators; Pneumatic Pressurization Equipment other than that for pressurizing cabins and compartments.

Excludes: Excludes Jet Engine Hydraulic Components (FSC 2840); Valves specifically designed for air conditioning, heating, ventilating, cabin pressurizing, and thermal de-icing (FSC 1660); Valves specifically designed for use with Aircraft Engines (FSC 2840); Guided Missiles and Guided Missile Engines (FSC 1338), Landing Gear (FSC 1620), Wheel and Brake System Components (FSC 1630); Oxygen Breathing System Components (FSC 1660); In-flight Refueling System Hydraulic components (FSC 1680); Specifically designed hydraulic power steering system components (FSC 1620).

Note: Note-This class includes only those components specifically designed for aircraft use.

1680 - Miscellaneous Aircraft Accessories and Components

Includes: Includes Control Assemblies, Push-Pull; Brace, Positioning Cargo Ramp stowed on board; Cockpit Mounted Control Quadrants; Actuators, Electro-Mechanical and Mechanical; Ventilators; Relief Tubes; Map Holders; Aerial Glider Towing Accessories attached to Aircraft; Belts, Safety and Lap; Harness, Shoulder and Safety; Litter Attaching Supports;Electric Windshield Wipers;Aircraft Onboard Inert Gas Generators;Aircraft Furniture;Aircraft Mounted Winches and Hoists;In-Flight Refueling System Components, including Fuel Components;Aircraft Curtains;Cable Tension Regulators;Sun Visors;Rear-View Mirrors;Mechanical Transmissions, Gearboxes and Constant Speed drives Specially designed for aircraft.

Excludes: Excludes Engine Mounted Control Assemblies; Fitted Covers, Aircraft Pylons; Helicopter Roter Brake System Components; Helicopter Automatic Stabilization Equipment.

1730 - Aircraft Ground Servicing Equipment

Includes: Includes Energizers; Engine Preheaters; Mooring Assemblies; Wheel Chocks; Beaching Equipment; Aileron, Elevator, and Rudder Locks; Passenger Loading Ramps; Maintenance Platforms; Aircraft Maintenance and Boarding Ladders; Aircraft Maintenance Slings and Hoists; Aircraft Fin Tilting Jacks; Airfield Specialized Lift Trucks and Trailers; Fitted Covers for Airframe Components; Aircraft Engine Covers.

Excludes: Excludes Airfield Specialized Trucks and Trailers designed primarily for transporting aircraft assemblies (FSC 1740); Maintenance Stands designed for support of aircraft assemblies during repair or overhaul (FSC 4920); Test Stands (FSC 4920); General Purpose Jacks (FSC 5120); Slings (FSC 3940), and Hoists (FSC 3950); Trailers (FSC 2330), Liquid Oxygen, Aircraft Servicing (FSC 1660).

Note: Note-This class excludes "vehicular components" such as those listed under FSC's 2520, 2530, 2540, 2590.

3040 - Miscellaneous Power Transmission Equipment

Includes: Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

4120 - Air Conditioning Equipment

Includes: Includes Store Type Units; Window and Room Type Units; Marine, and Vehicular Air Conditioning Units; Air Conditioning Plants and Systems.

Excludes: Excludes Air Conditioning Components (FSC 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC).

Note: Note-This class includes only complete air conditioning equipment, systems, and plants. Also included are specially designed nonoperating accessories such as a window panel used with a window type air conditioning unit to facilitate mounting. Excluded from this class are operating components, assemblies, parts, attachments, or accessories for use in or on air conditioning equipment, which are to be classified in Class 4130, or as otherwise specifically prescribed by the indexes and structure of the FSC.

4710 - Pipe, Tube and Rigid Tubing

Includes: Includes Culvert Pipes; Culvert Pipe Connector Bands; Metallic Pipes; Plastic Pipes; Tubes and Rigid Tubing and their assemblies.

Excludes: Excludes Air Conditioning-Heating Pipes (FSC 4520); Asbestos and Cement, Bituminized Fiber, Clay and Concrete Pipes (FSC 5630); Conduit Pipes and their assemblies (FSC 5975); Downspout Pipes (FSC 5670); Exhaust Pipes (FSC 1560, 2990, and 4520); Fire Extinguishing Systems Pipes and Tubes and their assemblies (FSC 4210); Flexible Tubing (FSC 4720); Glass Tubing (FSC 6640, and 9340); Laboratory Tubes (FSC 6640); Medical and Surgical Tubes (FSC 6515).

4920 - Aircraft Maintenance and Repair Shop Specialized Equipment

Includes: Includes Maintenance stands designed for support of aircraft assemblies during repair or overhaul; Test Stands and Test Equipment specially designed for maintenance and repair of aircraft components such as: engines, generators, hydraulic systems, armament, automatic pilot, fire control, flight control, and navigational systems.

Excludes: Excludes Hand Tools; Airfield Maintenance Platforms; Basic types of electrical and electronic test instruments, including those specially designed, such as ammeters, voltmeters ohmmeters, multimeters, and similar instruments, as shown in the indexes to the FSC; Test Apparatus used for both communications and other electrical and electronic equipment.

5315 - Nails, Machine Keys, and Pins

Includes: Includes Dowel Pins, Split Pins; Spikes; Tacks; Nonoffice Type Staples; Machine Keys; Brads; Shouldered Pins; Cotter Pins; Nails.

Excludes: Excludes Shafts (FSC 3040); Lock Keys (FSC 5340).

Note: Note-Nails, machine keys, and pins, including specially designed, will be classified in this FSC. a. Nails are slender, usually pointed fasteners with a head, and designed for insertion by impact. b. Machine keys are items generally inserted between two items, usually in a groove, to prevent relative rotation e.g., shaft and hub. c. Pins are cylindrical items of various materials used to align/attach two or more parts together and may allow for angular movement.

5340 - Hardware, Commercial

Includes: Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes: Excludes Weapons System Hardware (FSC 5342).

Note: Note-Common hardware designed primarily for commercial use will be classified in this FSC. Hardware is the physical, tangible and permanent components of end items that may not be classified elsewhere. It consists also of common items that are commonly used in construction and/or manufacturing (e.g., hinges, door locks).

5342 - Hardware, Weapon System

Includes: Includes Adapters; Anchor Plates and Straps; Anodes; Bellows; Couplings; Control Rods; Access Doors; Fairleads; Mounts; Tie Rods; Yokes.

Excludes: Excludes Commercial Hardware (FSC 5340).

Note: Note-Hardware designed for weapon systems unique applications will be classified in this FSC.

5360 - Coil, Flat, Leaf, and Wire Springs

Includes: Includes Compression Springs; Torsion Springs; Leaf Spring Assemblies; Flat Springs; Extension Springs.

Note: Note-All springs, including specially designed, will be classified in this FSC. A spring is an elastic mechanical device that regains its original shape after being compressed, extended or deflected.

5895 - Miscellaneous Communication Equipment

Includes: Includes Modems.

Excludes: Excludes Electronic Countermeasures Equipment.

Note: Note-This class includes miscellaneous communication equipment that is not classified in more specific classes (see the NOTE for FSG 58).

5925 - Circuit Breakers

Includes: Includes Circuit Breakers and Cutouts.

Excludes: Excludes Relays.

5945 - Relays and Solenoids

Includes: Includes Electromagnetic Actuators.

Excludes: Excludes Contractors.

5961 - Semiconductor Devices and Associated Hardware

Includes: Includes Semiconductor Assemblies; Semiconductor Diodes; Semiconductor Rectifiers, Semiconductor Thyristors; Transistors; Unitized Semiconductors; Associated Hardware except Sockets.

Excludes: Excludes Microcircuits; Optoelectronic Devices and Associated Hardware.

5962 - Microcircuits, Electronic

Includes: Includes Integrated Circuit Devices; Integrated Circuit Modules, Integrated Electronic Devices: Hybrid, Magnetic, Molecular, Opto-Electronic, and Thin Film.

Excludes: Excludes Single Circuit Elements such as Capacitors; Resistors; Diodes and Transistors; Printed Circuit Boards and Circuit Card Assemblies; and Filters and Networks.

Note: Note-(1) A microcircuit is defined as follows: A small circuit having a high equivalent circuit element density, which is considered as a single part composed of interconnected elements placed and/or formed on or within a single substrate to perform an electronic circuit function. The elements may be formed on or within a semiconductor material substrate; may consist of conductive film(s) formed on an insulating substrate; or may be a combination of one or both of these types with discrete elements. (2) The term "microcircuit", as applied to circuit devices included in this class, is delimited to exclude items consisting solely of interconnected "microcomponents" (discrete miniaturized components). Also excluded are items fabricated in the form of monolithic thick-film or thin-film structures that in themselves are not functional electronic circuits (e.g., Capacitors, Resistors, Transistors, or "arrays" thereof).

5985 - Antennas, Waveguides, and Related Equipment

Includes: Includes Aerials; Masts; Tower Equipment; Attenuators; Couplers; Transmission Lines.

Excludes: Excludes Tower Structures.

5995 - Cable, Cord, and Wire Assemblies: Communication Equipment

Includes:

Excludes: Excludes Cable Assemblies, Fiber Optic.

Note: Note-This class includes only those types of cable, cord, and Wire Assemblies and Sets (and Wiring Harnesses) used on or with equipment and components covered by Groups 58, 59 and 70. Cable, Cord, Wire Assemblies, and Sets (Wiring Harnesses) used on or with equipment classified in FSC Groups other than Groups 58, 59, or 70 are classified in FSC Class 6150 if multiapplication, or classified with the next higher classifiable assembly if specially designed.

5998 - Electrical and Electronic assemblies, Boards, Cards, and Associated Hardware

Includes:

Excludes: Excludes circuit card and electronic component assemblies which can be identified to a more definitive Approved Item Name.

6105 - Motors, Electrical

Includes:

Excludes: Excludes Starting Motors for Engines.

6130 - Converters, Electrical, Nonrotating

Includes: Includes Complete Battery Charging Equipment, Nonrotating; Power Supplies, Multiapplication.

Excludes: Excludes Rectifying Tubes; (FSC 5960); Rectifying Crystals (FSC 5961); Rotating Equipment (FSC 6125); Transformers (FSC 5950); and Semiconductor Devices and Associated Hardware (FSC 5961).

Note: Note-This class includes devices employing a means other than mechanical rotation for changing electrical energy from one form to another (i.e., AC to AC, DC to DC, AC to DC, and DC to AC).

6150 - Miscellaneous Electric Power and Distribution Equipment

Includes: Includes Appliance and Extension Cords; Electric Power and Distribution Cable with Attachments, Multiapplication; Common Components of Electrical Rotating Equipment, such as End Bells and Frames.

6220 - Electric Vehicular Lights and Fixtures

Includes: Includes Automotive, Marine, Railroad, and Aircraft Lights and Fixtures.

Excludes: Excludes Nonelectrical Vehicular Fixtures.

7025 - ADP Input/Output and Storage Devices

Includes:

Note: Note-This class includes devices used to control and transfer information to and from a Computer (as modified). The input device is used for transferring data and instructions into a computer. The output device is used to transfer results of processing by the computer to ADP peripheral devices. Input/output devices combine the above functions in the same device. This class includes printers, display units, disk drive units (magnetic, optical and floptical), tape drive units, terminals, data entry devices and transfer units. Also includes Optical Compact Disk (CD) devices used for the storage and retrieval of data and firmware.

U009 - Education Services